CA License #803545 

The short answer: If your cabinet boxes are solid and you like your layout, painting (the lowest cost, and a realistic DIY job) or refacing (new doors, drawer fronts, and veneer over the old boxes) can make the kitchen look new for a fraction of what replacement costs. If the boxes are water-damaged or falling apart, or you want to move the sink, add an island, or change how the kitchen works, replacement is usually the better use of your money. Two things decide it: the condition of the boxes and whether the layout stays.

Here’s a version of a question we see all the time on Houzz and in homeowner forums: “We have 1990s oak cabinets. They’re dated, but they’re not falling apart. Do we paint them, reface them, or rip them out?”

It’s a smart question to ask before anyone quotes you a number, because the three options solve different problems. Paint changes the color. Refacing changes the look. Replacement changes the kitchen. Pick the wrong one and you can end up paying twice.

Let’s walk through how to tell which camp your kitchen is in.

What’s the difference between painting, refacing, and replacing cabinets?

People sometimes use these words loosely, so it helps to pin them down.

PaintRefaceReplace
What changesColor and sheen of the existing doors, drawers, and framesNew doors and drawer fronts, new veneer or laminate on the frames and end panels, usually new hinges and pullsNew cabinet boxes, doors, and hardware
What staysEverything else, including the boxes and layoutBoxes, layout, and usually the countertopsOnly what you choose to keep (often nothing)
Can the layout change?NoNoYes
Typical time on siteDays to a couple of weeks, depending on who paintsAbout 3 to 10 days, per one 2026 guideWeeks, plus ordering lead time
Realistic DIY?Yes, if you’re patientRarely; precision workNot usually for a full kitchen

Here’s the key point: painting and refacing are both cosmetic. They work with what’s already there. If what’s there is the problem, no amount of new finish will fix it.

Start here: are your cabinet boxes worth keeping?

Before you compare prices, open the doors and look inside. This five-minute check usually decides the question for you.

If the boxes pass, you have a real choice. If they don’t, painting or refacing puts a new face on a failing structure. And what you find under a sink is a clue, not a diagnosis: if you see water damage, have the leak found and fixed before you spend money on any finish.

Boxes look fine? Then the next question is the one everybody wants answered first.

What does each option cost?

Here’s where the internet gets confusing. Different cost sites report very different numbers for the same work, and some even show replacement as cheaper than refacing. Here’s what several published 2025 and 2026 guides report. These are national figures, not Southern California bids.

OptionPublished rangeSource
Professional painting$2,500 to $6,500 (average about $4,000)Fixr, updated January 2026
DIY paintingAbout $200 to $600 in supplies, plus 30 to 60 hours of your timeHomeGuide
Refacing$4,234 to $10,231 typical (average about $7,232)Angi, 2025 data
Refacing$4,000 to $13,000 for most kitchensBlock Renovation, May 2026
Replacement, semi-custom cabinets installed$12,000 to $30,000Block Renovation, May 2026
Replacement, fully custom cabinets$35,000 to $60,000 and upBlock Renovation, May 2026

Why the disagreement? Mostly scope. A low “replacement” figure often prices stock cabinets for a small kitchen and leaves out the things that come along with tearing cabinets out: new countertops, plumbing and appliance reconnection, wall and floor patching, electrical changes, and disposal. A high refacing figure might include real-wood veneer, inset doors, or roll-out organizers.

So use the table for proportions, not for your budget. Painting usually costs least, refacing lands in the middle, and replacement costs the most once you count everything it sets in motion. If you’re weighing cabinets as part of a bigger project, our breakdown of what drives the cost of a kitchen remodel in the Los Angeles area shows how cabinets fit into the whole budget. Angi also offers a handy rule of thumb: if refacing would cost more than about half of replacement, look hard at replacing.

Can I paint my kitchen cabinets myself?

Yes, many homeowners do, and it can turn out great. But it’s not like painting a wall. It’s closer to refinishing furniture, times thirty. Here’s the general sequence paint makers like Sherwin-Williams describe:

  1. Remove doors, drawers, and hardware. Number everything (tape on the back of each door works) so it all goes back where it came from.
  2. Degrease thoroughly. Kitchen cabinets carry years of cooking oil, and paint won’t stick to grease.
  3. Scuff-sand and prime. Previously finished cabinets need sanding or a bonding primer made for slick surfaces. Follow the label for your product.
  4. Use a hard, durable enamel made for cabinets and trim, usually in satin, semi-gloss, or gloss.
  5. Apply thin coats and be patient. Plan on at least two finish coats, and let doors dry and harden according to the product label before you rehang them. Rushing this step is a common cause of sticking doors and chipped edges.

HomeGuide estimates 30 to 60 hours of work for an average kitchen. That’s a lot of weekends with a half-working kitchen.

One important safety step for older homes. The EPA says homes built before 1978 may have lead-based paint and suggests assuming it’s there if you’re not sure. That matters if your cabinets have ever been painted. The EPA’s lead-safe rule for contractors doesn’t apply to homeowners working on their own home (it does apply if you rent the home out). Even so, the EPA recommends having surfaces tested by a certified lead inspector or risk assessor, misting surfaces before sanding to keep dust down, and using HEPA vacuum attachments. Contractors who disturb more than six square feet of painted surface in a room of a pre-1978 home generally must be lead-safe certified and follow lead-safe work practices.

When is refacing the sweet spot?

Refacing makes the most sense when:

Refacing usually leaves your countertops in place, which is a big part of the savings. If your counters are worn out too, plan that decision at the same time, because new cabinets almost always mean new counters. Our guide comparing quartz, granite, and porcelain countertops covers the tradeoffs.

When does replacing your cabinets make more sense?

Replacement is the better path when the problem is structural or functional, not cosmetic:

Replacement also brings two things painting and refacing usually don’t.

Permits. The California Residential Code lists cabinets and countertops as finish work that’s often exempt from a building permit, but cities can and do change that list. The City of Gardena’s kitchen remodel handout (revised January 2026), for example, says replacing cabinets needs a permit while refacing alone doesn’t. And once a sink moves or a circuit is added, a permit is almost certain in any city. Our guide on whether you need a permit to remodel your kitchen in California explains where that line usually falls. Always confirm with your own building department.

Lead time. One 2026 guide estimates 2 to 10 weeks to get cabinets made and delivered, then 2 to 6 weeks of on-site work. Custom cabinets take longer.

Shopping for new cabinets? The California Air Resources Board says cabinets made with particleboard, MDF, or plywood must meet its formaldehyde standards. Look for labels such as “California 93120 Compliant for Formaldehyde” or “TSCA Title VI compliant,” or ask the seller.

Quick decision guide

Your situationUsually the best fit
Solid boxes, solid wood doors, you just hate the colorPaint
Solid boxes, but thermofoil, peeling, or a door style you can’t standReface
Solid boxes, tight budget, handy household with timeDIY paint
Water-damaged or sagging boxesReplace (after fixing the leak)
Want a new layout, island, or moved sinkReplace
Counters, floors, and appliances all being replaced anywayReplace
Selling soon and want a fresh, neutral lookPaint or reface

When to DIY vs. when to call a pro

Reasonable DIY: painting solid wood or MDF cabinets in a newer home, swapping hardware, adjusting hinges, and adding drawer organizers.

Call a pro when: your home was built before 1978 and the cabinets have been painted, you find water damage, you’re refacing (precise veneer and door fitting), or the job involves new layout, plumbing, gas, electrical, or a permit. A licensed general contractor can coordinate those trades, the inspections, and the countertop and appliance timing so your kitchen is down for as short a time as possible.

FAQ

Is refacing cheaper than replacing kitchen cabinets? Usually, when the boxes are in good shape. Some national guides put refacing at roughly half the cost of custom replacement, but the gap depends on materials, kitchen size, and what else replacement sets in motion.

Can you paint thermofoil or laminate cabinets? It’s possible with the right primer, but results are hard to get right, and peeling thermofoil has to come off first. Many homeowners find that new doors through refacing hold up better.

Do I need a permit to replace kitchen cabinets in California? It depends on your city. The state code lists cabinets as finish work that’s often exempt, but some cities, such as Gardena, require a permit to replace cabinets. Moving plumbing or adding circuits almost always needs one.

Can refacing change my kitchen layout? No. Refacing keeps the existing boxes where they are. If you want to move appliances, add an island, or change cabinet sizes, you’re looking at replacement.

Do I have to replace my countertops if I reface or paint? No. Painting and refacing usually leave countertops in place. Replacing cabinets is different, because existing counters often can’t be removed and reused.

Not sure which way your kitchen should go? Let’s look at it together

The right answer depends on what’s behind those doors, what you want the kitchen to do, and what else is on your list. We can look at your cabinets with you, tell you honestly whether the boxes are worth keeping, and put together a line-item estimate for the option that fits, including what a permit and the related trades would add.

Give us a call at 562-425-1050 or email us at info@desistogc.com (dcidirect.net)

Leave a Reply

Your email address will not be published. Required fields are marked *