The short answer: A general contractor is the one licensed company that takes responsibility for building your whole project. It prices the job, pulls the permit, hires and schedules the trades, buys the materials, meets the inspectors, and fixes what isn’t right before you make the final payment. The markup on your bid pays for that management plus the real costs of running a legitimate business, like insurance, supervision, and warranty service.
“If the electrician, the plumber, and the tile setter do the actual work, what is the general contractor doing for all that money?”
It’s a fair question. You add up the trades on a remodel bid, then see a line for overhead and profit. Here’s what that money buys, what California law says a general contractor is, how much contractors actually keep, and how to tell whether the markup on your bid is fair.
What does a general contractor do on a remodel?
Most of a general contractor’s work happens where you can’t see it. Think of it in three stages.
Before construction starts
- Walks the site, defines the scope, and builds a line-item estimate
- Coordinates with your designer, architect, or engineer when the project needs one
- Pulls the building permit under its own license
- Orders long-lead items (windows, cabinets, specialty fixtures) so they arrive on time
While the work is happening
- Schedules each trade in the right order, so drywall doesn’t go up before the plumbing inspection
- Supervises the site and checks the work as it goes in
- Buys, receives, and moves materials
- Meets the city inspector and handles corrections
- Writes and prices change orders when the scope changes
- Protects your floors and furniture, keeps the site safe, and cleans up
At the end
- Walks the punch list with you and finishes it
- Gets the final inspection signed off
- Collects lien releases from the subcontractors and suppliers it paid
- Answers the phone when something needs warranty attention later
Here’s who handles each job with a general contractor and without one.
| Job | With a general contractor | If you hire the trades yourself |
|---|---|---|
| Permit | Contractor applies under its license | You apply, usually as an owner-builder |
| Scheduling trades | Contractor | You |
| Inspections | Contractor meets the inspector | You, during business hours |
| Gaps between trades | Contractor owns the whole scope | Items can fall between contracts |
| Paying subs and suppliers | Contractor, with lien releases | You, and you collect the releases |
| Fixing problems | One company is responsible | You sort out which trade caused it |
What does California law say a general contractor is?
In California, “general contractor” isn’t just a job title. It’s a license classification.
The Contractors State License Board (CSLB) licenses general building contractors under the “B” classification. Business and Professions Code section 7057 describes a general building contractor as one whose main business is building structures that require at least two unrelated building trades or crafts.
The CSLB’s B license fact sheet (updated April 2025) spells out how that works in practice:
- A B contractor can take a contract for framing or carpentry on its own.
- For other work, the project must involve at least two unrelated trades besides framing or carpentry. Otherwise, the B contractor needs that specialty license or must hire a licensed specialty contractor.
- Fire sprinkler (C-16) and well drilling (C-57) work require the specialty license or a licensed specialty sub, even on a big job.
The permit matters too. Under Business and Professions Code section 7031.5, cities and counties must have every permit applicant sign a statement that they’re licensed, with the license number, or explain why they’re exempt. When your contractor pulls the permit, its license is on the record for your job.
If a contractor asks you to pull the permit yourself, slow down. Our guide to what you take on as an owner-builder in California explains how that shifts the legal and financial responsibility onto you.
Where does the markup actually go?
A contractor’s price usually has four parts. Some bids show all four. Others fold everything into one number. Either way, every legitimate bid pays for all of them somewhere.
| Part of the price | What it covers | How it may appear on a bid |
|---|---|---|
| Direct costs | Labor, materials, and subcontractors for the work itself | Line items by trade or area |
| General conditions | Job costs that aren’t part of the finished work: supervision, scheduling, cleanup, protection, portable toilet, temporary utilities, equipment rental | A separate line, or folded into markup |
| Overhead | Costs of running the company: insurance, workers’ comp, payroll taxes, office staff, vehicles, licensing | Usually inside the markup |
| Profit | What the company keeps to stay in business, grow, and cover warranty work | Usually inside the markup |
In a Houzz guide to contractor fees, remodeling professional Anne Higuera puts typical markups at roughly 10 to 30 percent or more. She notes that markup is “loosely described as covering overhead and profit” but pays for much more: insurance, labor burden, office costs, vehicles, marketing, and warranty work that never gets its own line item. In a separate Houzz guide, she says general conditions alone “can account for 10 percent or more of the project cost,” depending on access, logistics, and complexity.
This is a big reason bids look so different: one contractor lists general conditions as a line, another folds them into a higher markup.
How much do contractors actually keep?
Less than most people think.
The National Association of Home Builders (NAHB) published its 2026 Remodelers’ Cost of Doing Business Study in April 2026, based on 2024 financial data from remodelers nationwide. It found:
- Average gross profit margin: 29.9%. After paying for the direct costs of the jobs, about 30 cents of each dollar was left.
- Average net profit margin: 6.3%. After overhead, about 6 cents of each dollar was profit. NAHB says that’s the highest net margin for remodelers since 1996.
These are national averages from the remodelers in the study, not a price for your project or area. But the shape is clear: most of the markup runs the business, and a thin slice is profit.
Markup and margin aren’t the same number. Here’s a simple example with made-up figures. If a job’s direct costs are $100,000 and the contractor adds a 25 percent markup, the price is $125,000. The $25,000 markup is 25 percent of cost but 20 percent of the price. So when someone says “20 percent,” ask: 20 percent of what?
Can I just hire the trades myself?
For a one-trade job, people often do. In the 2026 U.S. Houzz & Home Study (more than 20,000 respondents, published April 2026), 29 percent of renovating homeowners hired a general contractor, making GCs the most-hired construction professional. But many more hired single trades: 41 percent hired electricians, 40 percent HVAC specialists, and 36 percent plumbers.
It changes when trades depend on each other. A kitchen or bathroom remodel, a room addition, an ADU, or anything that moves walls, plumbing, or electrical involves a sequence: demo, framing, rough plumbing and electrical, inspections, insulation, drywall, finishes, and final inspection. Someone has to run that sequence, and if it isn’t a contractor, it’s you.
When can you manage it yourself, and when do you need a general contractor?
You can often handle it yourself when:
- It’s one trade, like a new water heater, a panel upgrade, or a roof
- The licensed trade pulls its own permit and handles its own inspection
- You have time during business hours to meet workers and inspectors
A general contractor usually makes more sense when:
- Three or more trades have to work in sequence
- The project needs plans, engineering, or a permit with several inspections
- Walls, plumbing, electrical, or structure are changing
- The home is older and could hide surprises behind the walls
- You have a deadline, a lender, or a family living in the house during the work
How do I tell if a contractor’s markup is fair?
Comparing markup percentages alone can mislead you. A low percentage on a bid with missing scope can cost more in the end. Compare what each bid includes, then ask these questions:
- What does your markup cover, and are general conditions listed separately?
- Who supervises the job day to day, and how often are they on site?
- Who pulls the permit, and under whose license number?
- Which trades are your own crew, and which are subcontractors? Are the subs licensed?
- How are change orders priced, and is the same markup applied?
- Will you give me lien releases from subs and suppliers as you pay them?
- What warranty do you give, in writing?
Change orders deserve special attention. Our article on what a change order is and how to avoid surprise costs covers what California requires in writing before changed work starts.
A few warning signs: a price far below the others with no explanation, no one named to supervise, or a request that you pull the permit in your name.
Frequently asked questions
What’s the difference between a general contractor and a subcontractor? The general contractor holds the contract with you and is responsible for the whole project. Subcontractors are specialty trades, like electricians or plumbers, hired by the general contractor to do part of the work.
What is a normal general contractor markup? There’s no single standard. One remodeling professional writing for Houzz puts typical markups at roughly 10 to 30 percent or more, depending on project size, complexity, and what’s included. Compare what each bid covers, not just the percentage.
Can a general contractor do the electrical and plumbing work too? In California, a B general building contractor can take on a project that involves at least two unrelated trades besides framing or carpentry. For a single-trade job, it needs that specialty license or a licensed specialty subcontractor.
Is hiring a general contractor more expensive than hiring the trades myself? The contract price usually is higher, because it includes management, insurance, and supervision. Whether the project costs more in the end depends on how well you can schedule, supervise, and fix problems between trades yourself.
Want to see exactly what a contractor’s price covers?
The easiest way to judge a markup is to see a bid that shows its work. De Sisto Construction, Inc. is a California licensed general contractor (CSLB #803545) serving greater Los Angeles and Orange County since 2001. We guide permitting, inspections, and code-compliance coordination, and we build step-by-step outlines with line-item project costing, so you can see where your money goes before you sign. Learn more about our residential remodeling services, from kitchens and bathrooms to room additions and full home renovations.
If you’re planning a remodel and want a clear scope and line-item price, give us a call at 562-425-1050 or email us at info@desistogc.com (dcidirect.net)