CA License #803545 

The short answer: A general contractor is the one licensed company that takes responsibility for building your whole project. It prices the job, pulls the permit, hires and schedules the trades, buys the materials, meets the inspectors, and fixes what isn’t right before you make the final payment. The markup on your bid pays for that management plus the real costs of running a legitimate business, like insurance, supervision, and warranty service.

“If the electrician, the plumber, and the tile setter do the actual work, what is the general contractor doing for all that money?”

It’s a fair question. You add up the trades on a remodel bid, then see a line for overhead and profit. Here’s what that money buys, what California law says a general contractor is, how much contractors actually keep, and how to tell whether the markup on your bid is fair.

What does a general contractor do on a remodel?

Most of a general contractor’s work happens where you can’t see it. Think of it in three stages.

Before construction starts

While the work is happening

At the end

Here’s who handles each job with a general contractor and without one.

JobWith a general contractorIf you hire the trades yourself
PermitContractor applies under its licenseYou apply, usually as an owner-builder
Scheduling tradesContractorYou
InspectionsContractor meets the inspectorYou, during business hours
Gaps between tradesContractor owns the whole scopeItems can fall between contracts
Paying subs and suppliersContractor, with lien releasesYou, and you collect the releases
Fixing problemsOne company is responsibleYou sort out which trade caused it

What does California law say a general contractor is?

In California, “general contractor” isn’t just a job title. It’s a license classification.

The Contractors State License Board (CSLB) licenses general building contractors under the “B” classification. Business and Professions Code section 7057 describes a general building contractor as one whose main business is building structures that require at least two unrelated building trades or crafts.

The CSLB’s B license fact sheet (updated April 2025) spells out how that works in practice:

The permit matters too. Under Business and Professions Code section 7031.5, cities and counties must have every permit applicant sign a statement that they’re licensed, with the license number, or explain why they’re exempt. When your contractor pulls the permit, its license is on the record for your job.

If a contractor asks you to pull the permit yourself, slow down. Our guide to what you take on as an owner-builder in California explains how that shifts the legal and financial responsibility onto you.

Where does the markup actually go?

A contractor’s price usually has four parts. Some bids show all four. Others fold everything into one number. Either way, every legitimate bid pays for all of them somewhere.

Part of the priceWhat it coversHow it may appear on a bid
Direct costsLabor, materials, and subcontractors for the work itselfLine items by trade or area
General conditionsJob costs that aren’t part of the finished work: supervision, scheduling, cleanup, protection, portable toilet, temporary utilities, equipment rentalA separate line, or folded into markup
OverheadCosts of running the company: insurance, workers’ comp, payroll taxes, office staff, vehicles, licensingUsually inside the markup
ProfitWhat the company keeps to stay in business, grow, and cover warranty workUsually inside the markup

In a Houzz guide to contractor fees, remodeling professional Anne Higuera puts typical markups at roughly 10 to 30 percent or more. She notes that markup is “loosely described as covering overhead and profit” but pays for much more: insurance, labor burden, office costs, vehicles, marketing, and warranty work that never gets its own line item. In a separate Houzz guide, she says general conditions alone “can account for 10 percent or more of the project cost,” depending on access, logistics, and complexity.

This is a big reason bids look so different: one contractor lists general conditions as a line, another folds them into a higher markup.

How much do contractors actually keep?

Less than most people think.

The National Association of Home Builders (NAHB) published its 2026 Remodelers’ Cost of Doing Business Study in April 2026, based on 2024 financial data from remodelers nationwide. It found:

These are national averages from the remodelers in the study, not a price for your project or area. But the shape is clear: most of the markup runs the business, and a thin slice is profit.

Markup and margin aren’t the same number. Here’s a simple example with made-up figures. If a job’s direct costs are $100,000 and the contractor adds a 25 percent markup, the price is $125,000. The $25,000 markup is 25 percent of cost but 20 percent of the price. So when someone says “20 percent,” ask: 20 percent of what?

Can I just hire the trades myself?

For a one-trade job, people often do. In the 2026 U.S. Houzz & Home Study (more than 20,000 respondents, published April 2026), 29 percent of renovating homeowners hired a general contractor, making GCs the most-hired construction professional. But many more hired single trades: 41 percent hired electricians, 40 percent HVAC specialists, and 36 percent plumbers.

It changes when trades depend on each other. A kitchen or bathroom remodel, a room addition, an ADU, or anything that moves walls, plumbing, or electrical involves a sequence: demo, framing, rough plumbing and electrical, inspections, insulation, drywall, finishes, and final inspection. Someone has to run that sequence, and if it isn’t a contractor, it’s you.

When can you manage it yourself, and when do you need a general contractor?

You can often handle it yourself when:

A general contractor usually makes more sense when:

How do I tell if a contractor’s markup is fair?

Comparing markup percentages alone can mislead you. A low percentage on a bid with missing scope can cost more in the end. Compare what each bid includes, then ask these questions:

Change orders deserve special attention. Our article on what a change order is and how to avoid surprise costs covers what California requires in writing before changed work starts.

A few warning signs: a price far below the others with no explanation, no one named to supervise, or a request that you pull the permit in your name.

Frequently asked questions

What’s the difference between a general contractor and a subcontractor? The general contractor holds the contract with you and is responsible for the whole project. Subcontractors are specialty trades, like electricians or plumbers, hired by the general contractor to do part of the work.

What is a normal general contractor markup? There’s no single standard. One remodeling professional writing for Houzz puts typical markups at roughly 10 to 30 percent or more, depending on project size, complexity, and what’s included. Compare what each bid covers, not just the percentage.

Can a general contractor do the electrical and plumbing work too? In California, a B general building contractor can take on a project that involves at least two unrelated trades besides framing or carpentry. For a single-trade job, it needs that specialty license or a licensed specialty subcontractor.

Is hiring a general contractor more expensive than hiring the trades myself? The contract price usually is higher, because it includes management, insurance, and supervision. Whether the project costs more in the end depends on how well you can schedule, supervise, and fix problems between trades yourself.

Want to see exactly what a contractor’s price covers?

The easiest way to judge a markup is to see a bid that shows its work. De Sisto Construction, Inc. is a California licensed general contractor (CSLB #803545) serving greater Los Angeles and Orange County since 2001. We guide permitting, inspections, and code-compliance coordination, and we build step-by-step outlines with line-item project costing, so you can see where your money goes before you sign. Learn more about our residential remodeling services, from kitchens and bathrooms to room additions and full home renovations.

If you’re planning a remodel and want a clear scope and line-item price, give us a call at 562-425-1050 or email us at info@desistogc.com (dcidirect.net)

Leave a Reply

Your email address will not be published. Required fields are marked *