The short answer: Long Beach and West Hollywood both publish a planning range of about $40,000 to $160,000 for most soft-story retrofits. Cost data from San Francisco and Berkeley, reviewed by the policy group SPUR in 2023, averaged about $104,000 for 5 to 14 unit buildings and about $152,000 for 15 to 20 unit buildings. Your own number depends on how many weak wall lines need strengthening, the method your engineer chooses, foundation work, and what’s in the way. Tenant pass-throughs in Los Angeles, state grant cycles, and a property tax reassessment exclusion can soften the hit.
If you own an older apartment building with tuck-under parking, the first question after “Do I have to retrofit?” is almost always “How much is this going to cost me?”
It’s a fair question, and the honest answer starts with a range, not a single number. Below: what published cost data actually says, what pushes a retrofit up or down, the costs that live outside the construction contract, and the three places owners can find help paying for it.
If you’re still figuring out whether your building is covered at all, start with our guide to what a soft-story building is and whether yours needs a retrofit.
What do the published numbers say?
There’s no official price list, but a few public sources give useful ranges:
| Source | What it describes | Published figure |
|---|---|---|
| City of Long Beach, Seismic Program | Average cost to strengthen a soft-story (SWOF) building | $40,000 to $160,000 |
| City of West Hollywood, retrofit program FAQ (about 2018) | Rough order of magnitude for most soft-story retrofits | $40,000 to $160,000 |
| SPUR review of San Francisco and Berkeley data (2023) | Average per building, 5 to 14 units | About $104,000 (about $14,000 per unit) |
| SPUR review of San Francisco and Berkeley data (2023) | Average per building, 15 to 20 units | About $152,000 |
A few cautions. West Hollywood says its range is for information only and shouldn’t be used to estimate an individual building. The SPUR figures come from Bay Area programs, not Los Angeles County, and cost data ages quickly. Treat all of these as a way to sense the scale, not as a quote.
What makes one retrofit cost more than another?
Two buildings with the same number of units can land at very different prices. The usual reasons:
| Cost driver | Why it matters |
|---|---|
| Number of soft, weak, or open-front wall lines | One open parking front costs less than several |
| Retrofit method | Your engineer may call for wood shear walls, steel moment frames, or a mix; steel frames often mean more fabrication and larger footings |
| Foundation work | New or larger footings mean excavation, concrete, and sometimes cutting the parking slab |
| What’s in the way | Gas meters, electrical panels, water heaters, and plumbing in the garage may need to move |
| Hidden conditions | Dry rot, termite damage, or past unpermitted work often shows up once walls are opened |
| Access and phasing | Working around tenants’ cars, keeping exits open, and splitting work into stages adds time |
| Building size and height | More stories and more units above mean more load for the ground floor to resist |
That’s why an engineer’s evaluation comes before any reliable price. Until the design says how many wall lines get strengthened and with what, a contractor can only give you a range.
What’s in a retrofit budget besides construction?
The construction contract is the biggest piece, but not the whole budget. Plan for:
- Engineering: the structural evaluation, retrofit design, and calculations.
- Plan check and permit fees from your city’s building department.
- Inspections during construction, which may include special inspections your engineer specifies.
- Tenant requirements: in Los Angeles, rent-stabilized buildings need a Tenant Habitability Plan through the Los Angeles Housing Department before work starts.
- Parking and access: temporary parking arrangements while the ground floor is under construction.
- Contingency for what turns up when walls open. Our guide to how much contingency to keep explains how to size it.
Can I pass retrofit costs on to tenants?
In the City of Los Angeles, owners of rent-stabilized (RSO) units can apply to recover part of the cost. According to the Los Angeles Housing Department:
- You can pass through up to 50 percent of total seismic retrofit costs, divided equally among the rental units, if the department approves.
- The temporary surcharge is capped at $38 per month for 120 months, and the recovery period may be extended until the approved amount is collected.
- You must apply within 12 months after the retrofit work is completed.
- The application needs, among other things, your contracts, invoices, and proof of payment, the Tenant Habitability Plan, final permits, and the Certificate of Compliance for the retrofit.
So keep every invoice and payment record from day one. Outside Los Angeles’s rent-stabilized program, different rent rules apply, including state rent limits for many properties. Talk to a landlord-tenant attorney before raising rent to cover a retrofit.
Is there grant money for soft-story retrofits?
Sometimes, in cycles. The California Residential Mitigation Program’s Earthquake Multi-Unit Retrofit (EMR) program offered, in its 2026 cycle:
- Up to 70 percent of retrofit costs, capped at $4,260 per unit
- Up to 70 percent of pre-retrofit engineering and permit fees, capped at $7,000
- Eligibility limited to wood-frame, multi-story buildings built before 1991 with 5 to 10 units and tuck-under parking or an open ground floor, in a participating city, where the owner received a city order to retrofit
Participating Southern California cities in 2026 were Beverly Hills, Burbank, Culver City, Los Angeles, Pasadena, Santa Monica, Torrance, and West Hollywood. Registration ran from August 19 to September 30, 2026, and registering didn’t guarantee funding. Long Beach wasn’t on the list, though the city’s seismic page points owners to state grant and financing programs, including the CalCAP Seismic Safety Financing Program. Check the program’s site for the next cycle before you sign a contract, since grant rules can affect timing.
Will a retrofit raise my property taxes?
Not for the retrofit itself, if you file on time. California Revenue and Taxation Code section 74.5 says seismic retrofitting improvements to an existing building are not treated as “new construction” for reassessment. The exclusion covers the structural seismic work, not other upgrades like new plumbing or finishes done at the same time.
The catch is paperwork. Under the statute, you must notify the county assessor of your intent to claim the exclusion before, or within 30 days of, completing the project, and file supporting documents within six months of completion. The claim form is the State Board of Equalization’s BOE-64. Long Beach’s seismic FAQ says there are currently no tax benefits tied to SWOF repairs, so ask the Los Angeles County Assessor directly how the exclusion applies to your project before work wraps up.
How do I compare retrofit bids?
Make sure every contractor is pricing the same engineered plans, then compare line by line:
- Does the price include foundation and slab work shown on the plans?
- Who handles moving gas meters, electrical, or plumbing, and is it priced?
- How are dry rot, termite damage, and other hidden conditions priced if found?
- Are permit fees, special inspections, and engineer site visits included or excluded?
- How will the work be phased around tenants, parking, and utility shutoffs?
- Will you get organized invoices and payment records for LAHD cost recovery and the tax exclusion claim?
What can I do myself, and when do I need a pro?
You can usually handle: reading your city notice, gathering permits and records for the building, checking grant eligibility and dates, and setting up a folder for every invoice and payment.
You need professionals for: the structural evaluation and retrofit design (a California-licensed engineer or architect), the construction itself (a licensed contractor), and questions about rent increases or tax filings (an attorney, tax professional, or the county assessor).
Frequently asked questions
How much does a soft-story retrofit cost? Long Beach and West Hollywood publish a range of about $40,000 to $160,000 for most soft-story retrofits. Your cost depends on the number of weak wall lines, the retrofit method, foundation work, and site conditions.
How much does a soft-story retrofit cost per unit? A 2023 SPUR review of San Francisco and Berkeley data found about $14,000 per unit for 5 to 14 unit buildings. Larger buildings tended to cost less per unit. Local costs vary.
Can I charge tenants for a soft-story retrofit in Los Angeles? For rent-stabilized units, owners can apply to the Los Angeles Housing Department to pass through up to 50 percent of the cost, capped at $38 per month for 120 months. Applications are due within 12 months of completion.
Does a seismic retrofit increase property taxes in California? Seismic retrofitting improvements can be excluded from reassessment under Revenue and Taxation Code section 74.5, but you must notify the county assessor before or within 30 days of completion.
Are there grants for soft-story retrofits? The state’s EMR program offered up to $4,260 per unit plus up to $7,000 for engineering and permits in 2026, for eligible 5 to 10 unit buildings in participating cities. The 2026 registration window has closed.
Planning a retrofit? Start with a real number
A published range helps you see the scale. A plan for your building tells you what you’ll actually spend. Once an engineer has defined the work, a line-item estimate shows exactly where the money goes, so you can plan for cost recovery, grants, and the tax exclusion from the start.
De Sisto Construction, Inc. is a California licensed general contractor (CSLB #803545) based in Signal Hill and serving greater Los Angeles and Orange County since 2001. We offer soft-story seismic retrofit services and guide permitting, inspections, and code-compliance coordination with step-by-step outlines and line-item project costing.
Give us a call at 562-425-1050 or email us at info@desistogc.com (dcidirect.net)