CA License #803545 

The short answer: A tenant improvement allowance is money the landlord agrees to put toward building out your space, usually a set amount per square foot. It typically pays for permanent improvements like walls, lighting, HVAC, plumbing, and flooring, and sometimes for design and permits. It usually doesn’t pay for furniture, equipment, data cabling, or moving. Whether it’s enough depends on your space, your use, and the fine print, so compare it to a line-item estimate before you sign, not after.

“The landlord is giving us a build-out allowance, so we’re covered.”

Sometimes that’s true. More often, the allowance covers a good share of the construction, and the business owner ends up paying for the rest: the design fees the lease left out, the cabling and equipment, the landlord’s management fee, and the surprises in an older space. Then there’s timing. Many allowances are paid back to you after the work is done, which means somebody has to front the money first.

Here’s what an allowance usually covers, where the gap tends to hide, when the money actually shows up, and how to check whether your number holds up.

What is a tenant improvement allowance?

It’s a construction budget the landlord funds as part of your lease. It’s usually quoted per square foot and multiplied by the size of your space. A 2023 article on lease work letters in the American Bar Association’s Probate & Property magazine describes the common structure: the allowance is the lesser of the actual cost of the work or a fixed maximum. In plain terms, the landlord pays up to a cap, and you pay anything above it.

The allowance is a negotiated number. Lease length, your business’s financial strength, the condition of the space, and how badly the landlord wants a tenant all affect what you’re offered.

What does a TI allowance usually cover?

Leases differ, so treat this as a starting map, not a rule:

Usually coveredSometimes covered (negotiate it)Usually not covered
Interior walls, doors, and ceilingsArchitect and engineering feesFurniture and movable equipment
Electrical, lighting, and HVAC workPermit and plan check feesData and phone cabling, AV, and security systems
Plumbing and restroomsProject managementMoving costs
Flooring and paintSignageWindow coverings and decor
Work that stays with the buildingCabling or moving costs, if negotiatedAnything you’d unplug and take with you

A helpful test from an August 2026 CommercialCafe guide: the allowance generally pays for improvements that would benefit the next tenant, while “anything you would unplug and take with you tends to fall outside the allowance.”

On soft costs like design fees, the ABA article is clear that they’re a negotiation point. If the landlord wants them excluded, the lease should say so. If you want them included, make sure the lease says that.

Where does the gap usually hide?

The gap is everything your project needs that the allowance doesn’t pay for. Common sources:

How do I tell if my allowance is enough?

You can’t judge an allowance by its size alone. You have to compare it to what your project will actually cost. Here’s a simple way to do it:

  1. Get a line-item estimate for the construction your space needs, based on a walkthrough and your layout.
  2. Add the costs outside construction: design, permits, cabling, furniture, equipment, moving, and a contingency.
  3. Subtract anything the landlord takes off the top, such as a supervision fee.
  4. Subtract the allowance. What’s left is the cash you’ll need to bring.

For a rough sense of scale, Cushman & Wakefield’s 2026 Office Fit Out Cost Guide puts new office construction in Los Angeles at about $198 per square foot, priced as of December 2025. That figure includes a 10% contingency but not design fees, low-voltage cabling, AV, security, or furniture. Our guide to commercial build-out costs in Los Angeles and Orange County explains what’s in that number and what isn’t.

An example, for illustration only: Say a landlord offers a $60 per square foot allowance on a 3,000-square-foot office. That’s $180,000. At the benchmark above, construction alone for a brand-new office layout of that size would be about $594,000, before design, cabling, and furniture. Reusing existing walls, ceilings, and systems in a second-generation space would lower that, but the point stands: the offer and the project can be far apart. These are illustrative numbers, not a bid or a typical allowance. Your own estimate is the only number that counts.

When do you actually get the money?

This catches a lot of tenants off guard. Allowances are often paid as reimbursement, not as cash up front. The ABA article describes two common setups: payment after completion, or progress payments (draws) during construction with a portion held back as retainage until the end.

Each payment usually comes with paperwork. Draw requests commonly need invoices, certifications, and lien waivers from the contractor and subcontractors. In California, those waivers use statutory release forms, conditional and unconditional. The final payment often requires more, and according to the ABA article, many landlords also require that the tenant “has moved into the space, opened for business, and started paying rent.”

So plan your cash flow. Until the landlord pays, you or your contractor are carrying the cost. Ask exactly how many days the landlord has to pay after you submit a complete request, and what happens if they’re late. The ABA article notes that a common tenant remedy is a right to offset unpaid allowance against rent.

What if I don’t use it all, or I go over?

If you spend less, the leftover money often goes back to the landlord. The CommercialCafe guide notes that tenants can sometimes negotiate to apply the balance to rent or save it for later improvements. Ask for that before you sign.

If you go over, you usually pay the difference. Some landlords will fund extra work and add it to your rent over the lease term, usually with interest. CommercialCafe describes it as working “like borrowing from your landlord.” Compare that rate to other financing, and check what you’d owe if you leave early. The ABA article notes that early termination clauses often require repaying the unamortized part of the allowance.

Who manages the build-out also changes the math. In a landlord-run turnkey deal, the landlord typically carries overruns within the agreed scope. When you run the project with an allowance, overruns are usually yours. Our post on landlord build vs. tenant build compares the two.

Questions to ask before you sign

What can I figure out myself, and when should I bring in help?

You can usually handle: reading the allowance section of the letter of intent or draft lease, listing what’s included and excluded, and asking the landlord or broker the questions above.

Bring in a contractor when: you need a real construction number to compare against the allowance. A walkthrough and line-item estimate before signing shows you the gap while you can still negotiate.

Bring in your broker and attorney when: you’re negotiating the allowance amount, what it covers, payment terms, and what happens to unused or extra funds. This article is general information, not legal or financial advice.

Frequently asked questions

What does a tenant improvement allowance cover? Usually permanent improvements that stay with the space, such as walls, ceilings, lighting, HVAC, plumbing, restrooms, and flooring. Design fees and permits are sometimes included. Furniture, equipment, cabling, and moving usually aren’t.

Is a TI allowance paid up front? Often not. Many allowances are paid in draws during construction or as reimbursement after the work is done, with invoices and lien waivers required. Ask how and when payments are made.

What happens to unused tenant improvement allowance? It often goes back to the landlord unless the lease says otherwise. Some tenants negotiate to apply it to rent or future improvements.

What if my build-out costs more than the allowance? You usually pay the difference. Some landlords will fund extra work and add the cost to rent over the lease term, usually with interest.

How do I know if my TI allowance is enough? Compare it to a line-item estimate for your space, plus design, permits, cabling, furniture, moving, and contingency. The difference is what you’ll need to fund yourself.

Weighing an allowance offer? Get a real number first

An allowance is only “enough” when you know what your space will actually cost. The best time to find that out is before the lease is signed, while the amount, the soft costs, and the payment terms are still on the table.

De Sisto Construction, Inc. is a California licensed general contractor (CSLB #803545) based in Signal Hill and serving greater Los Angeles and Orange County since 2001. Our commercial work includes tenant improvements, build-outs, offices, retail, and restaurants, and we put together step-by-step outlines and line-item project costing, so you can compare an allowance offer to a real number. Learn more about our commercial build-out services for businesses.

Give us a call at 562-425-1050 or email us at info@desistogc.com (dcidirect.net)

Leave a Reply

Your email address will not be published. Required fields are marked *